It should be noted that new equipment does not need to be tested – only inspected and visually marked. After the test, the item is labeled to confirm that it has been tested, along with the date, test date, and time of the next test. It`s also important to remember that some companies conduct their own risk assessment. This means that they may have a different testing frequency and label that is more common than advertised. Of course, this is perfectly fine, while rarer tests are not acceptable. The time required for testing and marking should vary depending on the device being tested. A visual inspection of the device takes a few minutes at a time, and some other devices may need to undergo several tests before they are marked as safe and acceptable. AS/NZ 3760:2010 (Table 4) specifies the minimum standard interval required for the frequency of testing and labels in New Zealand. The frequency may vary depending on specific risk management practices and occupational health and safety planning. That`s why it makes sense to have a reliable team when it comes to the legal requirements of Test and Tag in New Zealand that you need to meet. For this reason, occupational safety standards are there to determine the intervals at which equipment testing and marking must be carried out in each industry. If you`re not sure you can answer « yes » to the first three questions, you`re better off using the services of a reliable team that can take care of all your testing and tagging needs.
Have you done everything in your power to ensure that every device and all your devices have been properly tested and labeled? That`s why a professional team like Jim`s Test & Tag NZ is the safest way to keep your job safe. All electrical tests and labels must be carried out in strict accordance with AS/NZS3760. This means operational safety testing and testing of all electrical equipment. According to the standard, tests and markings should be carried out every 3 months to every 5 years – depending on the type of equipment and the working environment. For example, it is recommended that factories, warehouses and production facilities test equipment every 6 months. While devices in residential areas such as hotels or hostels should be tested every 2 years. How often you test and label depends on the type of equipment and the workplace. For example, electrical equipment used on a construction site – outdoors and in wet conditions – should be tested more frequently than a computer in an office. Only a « competent » person can inspect and test electrical appliances. To become proficient in testing and labeling work, a person must be able to demonstrate competence through training, knowledge, or a combination of both.
The best way to do this would be to take a testing and labeling competency course. New equipment should be tested before it is put into service in the workplace, and regular testing should be conducted throughout the life of the electrical equipment. It`s often difficult to make sure you`re on top of all your workplace safety issues. Managing your company`s day-to-day operations is hard enough without adding the added weight of knowing the latest health and safety regulations and whether you`re fully compliant. Yes. Electrical equipment that has been maintained or repaired and that could have affected electrical safety must be inspected, tested and labelled in accordance with the requirements of AS/NZS 3760:2010 before it is returned to service. AS/NZS 3760 (external link) is an option for SEBs to demonstrate compliance testing and marking. Yes, all devices must be turned off before being tested. It must avoid certain major dangers and also ensure the safety of our operators and customers.
The device can be turned back on once the assessment is complete. It is recommended to have these devices tested and labelled every 3 months. New Zealand standards recommend specific testing and labeling frequencies depending on the type of environment the appliance is in. Sometimes this can vary depending on the individual risk assessment in the workplace. Industries such as construction, demolition and mining must have their equipment tested and marked every 3 months. This is due to the harsh nature of the industry, which is likely to damage equipment faster. Test and label colors change during different times of the year, effectively coinciding with a specific test label color. Even if your workplace refrains from testing and labelling, it`s still important to be on the lookout for damaged equipment, connectors or tools that need to be replaced urgently.
The easiest way is to have your laser electrician tested and marked for you. The New Zealand standard AS NZ 3760 specifies that the time between using a PAT tester is based on the type of environment in which the appliance is located. When testing and labeling your devices, make sure your devices are secure, that you meet your insurance company`s requirements, and that you are protected by law. Quite simply, testing and marking is a matter of compliance and a requirement. And remember, whether tested and labeled or not, electrical equipment should always be protected from DMCs in certain circumstances, such as being outdoors in moisture. Most of the information on these environments falls under AS/NZS 3012. In addition to stricter intervals, you should also use certain test and label colors at certain times of the year in New Zealand. These colors change every three months, coinciding with your regular tests.
Whoever does the work must have the knowledge and skills to do the job well. It does not have to be a registered electrician, but the person must be able to understand the standards involved. However, only a registered electrician can solve all the problems that the tests reveal. For rental equipment, electrical equipment must be inspected prior to rental and tested and marked every three months.
